Description

The NanoIndenter performs indentation tests by driving a diamond indenter into the specimen surface and dynamically collecting the applied force and displacement data. Material properties are derived from the load and depth data. Specimens are typically relatively smooth and flat. Hardness, elastic modulus, and phase angle (from which storage and loss moduli can be calculated) data are produced and can be exported as Excel spreadsheets. Test positions are targeted using an optical imaging system with a 250X display.

Accessories:

• CSM (Continuous Stiffness Measurement) performs Modulus calculation at hundreds of points during a single indent.
• DCM (Dynamic Control Module) allows highest resolution testing.
• High Load allows loading up to 10 N without loss of resolution.
• A three-sided diamond pyramid (Berkovitch) is available for charfac images users. Other geometries can be obtained.

Capabilities:

Specimens are typically mounted by gluing to a 1-1/4" (31.75 mm) diameter cylinder with superglue. Specimens as high as 9/16" (14 mm) are easily accommodated. Taller specimens can be tested with some limitations. Specimens less than 3/16" (4 mm) in height can be as large as 4" (10 cm) across, i.e. a 4" wafer.